Register Now

peter23 · 01-09-2016, 03:05 PM

Just wondering what other peoples experience with the KDS brush-less servos ?? been ruining these on my 5.5 with hundreds of flights and still like new and move very smooth. I do remember having a hard crash with these and at the time was using the alloy horn that bent around 180 degrees with no damage to the servo at all. Also run these on my 7.2 with lots of flights but just searching and find no comments about these servos and only the old full size that develop slop in the gears so i`m guessing everyone loves these servos and i have found them to be great.

ah_liang · 01-09-2016, 03:47 PM

Are u aware if they are rebrand of some other servos?

peter23 · 01-09-2016, 09:46 PM

I suspect maybe the firmware used might be the same as other brands but not sure and would love to know.

peter23 · 01-13-2016, 05:24 PM

So anyone got any info on these servos?? do they center good and specks are true with reliability. Was considering BK 7002HV and tail 7006HV

HeliXXL · 08-18-2016, 10:15 AM

I'm in the same boat, building a 7.2 and trying to decide between kds servos, BK, and RJX.

JLH_1 · 08-22-2016, 06:35 PM

I have the same KDS servos that come with the 7.2 combo for 3 years still going strong. If that helps. I run on a 2s lipo direct

huckfin1 · 09-10-2016, 06:02 PM

I think KST makes the KDS servos. 'Im still researching to verify. I need gear sets and they are hard to find.

01-09-2016, 03:05 PM	#1 (permalink)
peter23 Registered Users Join Date: Mar 2014	KDS BL- 680 & 690 servo experience Just wondering what other peoples experience with the KDS brush-less servos ?? been ruining these on my 5.5 with hundreds of flights and still like new and move very smooth. I do remember having a hard crash with these and at the time was using the alloy horn that bent around 180 degrees with no damage to the servo at all. Also run these on my 7.2 with lots of flights but just searching and find no comments about these servos and only the old full size that develop slop in the gears so i`m guessing everyone loves these servos and i have found them to be great.

01-09-2016, 03:47 PM	#2 (permalink)
ah_liang Registered Users Join Date: Sep 2011	Are u aware if they are rebrand of some other servos? __________________ Nothing smaller than 700 .....

08-22-2016, 06:35 PM	#6 (permalink)
JLH_1 Registered Users My HF Map location Join Date: Oct 2008	I have the same KDS servos that come with the 7.2 combo for 3 years still going strong. If that helps. I run on a 2s lipo direct __________________ Jason Hunter RCbattery.com KST Servos

09-10-2016, 06:02 PM	#7 (permalink)
huckfin1 Registered Users Join Date: Jun 2011	I think KST makes the KDS servos. 'Im still researching to verify. I need gear sets and they are hard to find. __________________ Blade 230s (Night)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-09-2016, 09:46 PM	#3 (permalink)
peter23 Registered Users Thread Starter Join Date: Mar 2014	I suspect maybe the firmware used might be the same as other brands but not sure and would love to know.

01-13-2016, 05:24 PM	#4 (permalink)
peter23 Registered Users Thread Starter Join Date: Mar 2014	So anyone got any info on these servos?? do they center good and specks are true with reliability. Was considering BK 7002HV and tail 7006HV

08-18-2016, 10:15 AM	#5 (permalink)
HeliXXL Registered Users Join Date: May 2011	I'm in the same boat, building a 7.2 and trying to decide between kds servos, BK, and RJX.

Register Now

Log-in