 |
START HERE |
|
| Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
|
|
|
Unregistered
|
||||||
| 250 Class Electric Helicopters 250 Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar. |
|
|
1Likes |
|
|
LinkBack | Thread Tools | Display Modes |
09-24-2018, 02:37 PM
|
#1 (permalink) |
|
Registered Users
Join Date: Jun 2015
Location: KC MO
|
Custom frame.
Started working on this this morning. Let's see how this goes. Will be 3D printed.
__________________
LOGO 480 XXtreme FrSky Horus X10S https://kc3dprint.com - 3D Printing on Demand and 3D Printed RC Helicopter Parts and Upgrades Keith - MSH Brain2 Beta Team |
|
|
| Sponsored Links | |||
|
Advertisement |
|
||
|
09-24-2018, 06:04 PM
|
#2 (permalink) |
|
Registered Users
Join Date: May 2013
Location: Pittsburgh,Pa.
|
Nice to see the elevator servo mounted like that, not hanging off the side.
But just a question, why not rotate the servo 90 degrees and center it? Looking at my 250 it seems doable.The antirotation bracket would need a redesign. I have always wondered why manufacturers did not do this. HW.
__________________
Many helis from the 70s to 2000s. Align,Blade,GMP,Hirobo,Kyosho,Schluter.Flybars cool,FBL too. Currently flying the little ones. |
|
|
|
09-24-2018, 08:06 PM
|
#3 (permalink) |
|
Registered Users
Thread Starter
Join Date: Jun 2015
Location: KC MO
|
What do you mean exactly? Like rotate it 90 on the Z axis?
__________________
LOGO 480 XXtreme FrSky Horus X10S https://kc3dprint.com - 3D Printing on Demand and 3D Printed RC Helicopter Parts and Upgrades Keith - MSH Brain2 Beta Team |
|
|
|
|
09-25-2018, 06:29 PM
|
#4 (permalink) |
|
Registered Users
Join Date: May 2013
Location: Pittsburgh,Pa.
|
 Rotate this servo 90 degrees counterclockwise and mount across the upper mounting hole location. Would this be feasible?
__________________
Many helis from the 70s to 2000s. Align,Blade,GMP,Hirobo,Kyosho,Schluter.Flybars cool,FBL too. Currently flying the little ones. |
|
|
|
|
09-25-2018, 07:57 PM
|
#5 (permalink) |
|
Registered Users
Thread Starter
Join Date: Jun 2015
Location: KC MO
|
It would be hard because the 250 requires a very long 11mm ball distance on the servo arms. So the servo likely wouldn't be centered anyways.
__________________
LOGO 480 XXtreme FrSky Horus X10S https://kc3dprint.com - 3D Printing on Demand and 3D Printed RC Helicopter Parts and Upgrades Keith - MSH Brain2 Beta Team |
|
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
