Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > OpenTX Radios


OpenTX Radios OpenTX Radios Discussion and Support Forum


Reply
 
LinkBack Thread Tools Display Modes
Old 02-03-2017, 11:56 PM   #1 (permalink)
Registered Users
 
Posts: 572
 

Join Date: Nov 2009
Default New Horus and x6r receiver tail issue with vbar

Hi....just set up a Compass 6hvu with my new Horus x12s radio and a new x6r receiver and all went well except for the tail. I got the gyro gain set up and it is where it should be on the vbar graph but if I drop the yaw rate it does nothing and my tail is ballistic!!! My end points are where they should be in the transmitter graph at 100 100 but I cant understand why my tail piro rate is so fast and not responding to the yaw rate on the vbar??? any help would be appreciated. Forgot to add it is set up sbus.
Rush fan is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 02-04-2017, 12:08 AM   #2 (permalink)
Registered Users
 
Posts: 4,431
 

Join Date: Mar 2013
Default

Vbar does not normally honor the tail gyro setting from the TX.

To get that to work you need to select a bank where the tail gain is set from the gyro channel.

It's possible that they modified their firmware to not allow that adjustment outside of using a VBC TX.

gunny_jeeves is offline        Reply With Quote Quick reply to this message
Old 02-04-2017, 12:12 AM   #3 (permalink)
Registered Users
 
Posts: 572
Thread Starter Thread Starter
 

Join Date: Nov 2009
Default

Thanks for the reply...I did set a bank for gyro and when I drop the gyro gain on the transmitter it also drops on the graph so it is working.
Rush fan is offline        Reply With Quote Quick reply to this message
Old 02-04-2017, 12:14 AM   #4 (permalink)
Registered Users
 
Posts: 572
Thread Starter Thread Starter
 

Join Date: Nov 2009
Default

I also disabled the bank and set the gain through the vbar software and no change?????
Rush fan is offline        Reply With Quote Quick reply to this message
Old 02-04-2017, 01:20 AM   #5 (permalink)
Registered Users
 
Posts: 572
Thread Starter Thread Starter
 

Join Date: Nov 2009
Default

Found what the problem was....I recalibrated the sticks in the transmitter and all is well!!! If anyone runs into an issue like this well there you go
Rush fan is offline        Reply With Quote Quick reply to this message
Old 02-04-2017, 02:16 AM   #6 (permalink)
Registered Users
 
Posts: 4,431
 

Join Date: Mar 2013
Default

Ha! Glad to have been of help.
gunny_jeeves is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1