Register Now

Windmanquebec · 01-13-2017, 05:36 PM

I have 2 Trex 550 I don't now which version. One as a 549mm boom and the other one around 72mm.
Can I fit this frame in a fuselage meant for at Trex 600 as long as I get the 600 boom and TT?

Keyrigger · 01-13-2017, 05:42 PM

Yes. I am right in the middle of stretching a 550 to a 700 but that's another story. The 550 and 600 boom cases are the same and will give you the correct spacing from main to tail rotor with those two parts. The nice thing about the 600 booms I bought is that they have the long rods that have helped in many tail pitch rods on different models. Good luck with the conversion.

Don

01-13-2017, 05:36 PM	#1 (permalink)
Windmanquebec Registered Users My HF Map location Join Date: Jan 2012	trex 550 with 600 fuselage I have 2 Trex 550 I don't now which version. One as a 549mm boom and the other one around 72mm. Can I fit this frame in a fuselage meant for at Trex 600 as long as I get the 600 boom and TT? __________________ SYMA S-107/BLADE (2)450 3D FBL/ALIGN(3)T-REX 500 (2)T-REX 550 T-REX 700L V2/DX8 SCALE MD500(450) UH-60/AS350/BO105(500) A109(600)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-13-2017, 05:42 PM	#2 (permalink)
Keyrigger HF Scale Support Join Date: Jan 2010	Yes. I am right in the middle of stretching a 550 to a 700 but that's another story. The 550 and 600 boom cases are the same and will give you the correct spacing from main to tail rotor with those two parts. The nice thing about the 600 booms I bought is that they have the long rods that have helped in many tail pitch rods on different models. Good luck with the conversion. Don

Register Now

Log-in