Futaba (-)gain question--setup - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Spirit FBL system


Spirit FBL system Spirit FBL System Discussion


Reply
 
LinkBack Thread Tools Display Modes
Old 10-27-2017, 03:33 PM   #1 (permalink)
Registered Users
 

Join Date: Feb 2016
Location: Universal City, Texas
Default Futaba (-)gain question--setup

Hi--I have my banks set up
0=rescue (normal)
1= stab (normal)
2= coax

Rescue works in the correct direction (-gain in Tx)

In bank 1 and 2, am I getting stab and coax effect if my "servo monitor" doesn't show a change to (-) gain ? ie the rudder gain stays the same on the "servo monitor" for all 3 banks.

If this is wrong, I'm having trouble setting a (-) gain in the Tx for Bank 1 and 2, without also affecting Bank 0.

Thanks very much
zr1100 is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 10-27-2017, 07:19 PM   #2 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Feb 2016
Location: Universal City, Texas
Default

P.S. Futaba 18SZ
zr1100 is offline        Reply With Quote Quick reply to this message
Old 10-28-2017, 06:09 AM   #3 (permalink)
Registered Users
 
Posts: 1,520
 

Join Date: Jan 2010
Location: Czech Republic
Default

Hello!

To activate a stabilisation or rescue mode, it is required to set negative gyro gain always. You can verify it in the Diagnostic tab for each bank (note that when software is opened you have to change the banks from there).

Can you upload your settings for each bank here?
Spirit profile beta
__________________
Spirit System - www.spirit-system.com
ZeXx86 is offline        Reply With Quote Quick reply to this message
Old 10-28-2017, 01:31 PM   #4 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Feb 2016
Location: Universal City, Texas
Default

OK--uploaded setup--Thank You
zr1100 is offline        Reply With Quote Quick reply to this message
Old 10-28-2017, 04:56 PM   #5 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Feb 2016
Location: Universal City, Texas
Default Neg gain--Futaba

P.S. After sending setup file, I was able to program neg. gains for my Idle-up 1 and 2--that should allow Bank 1 and 2 to activate Stab and Coax ?

I just can't get 18SZ to allow separate gains, other than with the Flight Mode switch (Normal, Idle-up 1, IU2,)

I guess that's a Futaba programming question--Thanks
zr1100 is offline        Reply With Quote Quick reply to this message
Old 10-29-2017, 01:46 AM   #6 (permalink)
Registered Users
 
Posts: 5,722
 

Join Date: Apr 2012
Location: Madrid, Spain / Torino, Italy
Default

After uploading each bank's setup file, copy and post the link here, otherwise we cannot see your setup
__________________
Oxy 2Warp 360Blade 450XBlade 450X NightflyerGoblin 500 ♦ 2 X mCPX v2 ♦ night fly mQXLadyMQXnano QXnano QX FPVInductrixDX8 G1
Coco66 is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Insurance
Please select your insurance company (Optional)
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © VerticalScope Inc. All rights reserved.
 

SEO by vBSEO 3.6.1