Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Miniature Aircraft Helicopters > MA Whiplash


MA Whiplash Miniature Aircraft Whiplash Helicopter Support Forum


Reply
 
LinkBack Thread Tools Display Modes
Old 02-18-2018, 07:54 AM   #1 (permalink)
Registered Users
 
Posts: 5,400
 

Join Date: Nov 2009
Location: Massachusetts
Default Loctite 648 removal

...Sooo, I crashed my V2 conversion

https://www.helifreak.com/showthread...12#post7537547

The loctite 648 that MA recommends to assembly the V2 TT really works. Its true that the screw on the TT end is really just a backup now, that stuff is not coming off under normal use.

I learned the following trying to repair this crash - be CAREFUL removing them if you hope to save and reuse the fittings. 648 is resistant to most solvents. From my reading about the only thing that will work is CA debonder (which is nitromethane).

Heat is a better option, but you have to get it over 250C (500F). I tried a DeWalt contractors heat gun (1500w) and it did nothing. Had to get out the pocket torch. Heat the tube on either side of the fitting until the loctite starts smoking and then you can slide the parts off with thick gloves.

Be careful, and resist the temptation to yank them off with pliers... I had to on one of them and bent it (once hot everything gets very soft).

Once the fittings are off, luckily most of the residue seemed to stick to the tube, so getting them on a new tube should not be hard.



BTW - odds are you are going to destroy the bearings, so have some spares on hand. I need to check with Josef what the size is of the 131-485.
Attached Thumbnails
Click image for larger version

Name:	2018-02-17 20.26.26.jpg
Views:	568
Size:	84.1 KB
ID:	737938  
__________________
MA Whiplash Gas v2 | HelixHeli T700 Gas conversion | T450 Sport FBL | OMP M1
Futaba, Bavarian Demon, Hanson Engines| DIY Lithium field battery
jharkin is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 03-01-2018, 08:59 AM   #2 (permalink)
Registered Users
 
Posts: 1,668
 

Join Date: Feb 2006
Default

Jeremy,

I've done the pocket torch method, but I like using my Dermal with a cut-off wheel and carefully slice both sides of the TT. Then peal it like a banana!
__________________
"I love the smell of Nitro/Gas in the morning!"

Citizen 654
rcnut is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1