Twinn Rexx Head Suggestions?

[rcheli2032]

I have purchased a Twinn Rexx kit and have been working on building the kit. I wondered what people have used for the rotor heads recently. My original thought was to do 3 blade heads.

I know the 3 blade set for the 360 CFX was the original 3 blade head suggested for use with this kit but it seems to be unavailable everywhere. Are there any other current 3 blade heads that work well with this kit? (Especially with dampening)

Alternatively, what have people successfully used as a 2 blade head? I see that one of the Tarots might work, but there is no information on whether they have any dampening.

[EnstromPilot]

For 3 blade heads, a few people have used the Gaui X3 3 blade heads as well, which are still available. They are damped, similarly to the Blade 360 heads.

[teamdavey]

I have one flying with the Gaui heads. Take out the rigid dampers it comes with and replace with soft (basically loose) O rings so the blades can flap.

Jim Davey