Register Now

mikem65d · 04-21-2019, 03:09 PM

Would mechanical linkage adjustment remove a slight yaw to the right in flight?

Ivan · 04-21-2019, 06:45 PM

If you have the AR7200, make sure your gain channel is set to heading hold mode and not rate mode.

If it is in rate mode and you want that, then yes, mechanical trim will help.

If it is in heading hold mode, then check to make sure you don't have trim or sub trim on the tail channel.

Sent from my Pixel XL using Tapatalk

mikem65d · 04-28-2019, 03:20 PM

Quote:

Originally Posted by Ivan

If you have the AR7200, make sure your gain channel is set to heading hold mode and not rate mode.

If it is in rate mode and you want that, then yes, mechanical trim will help.

If it is in heading hold mode, then check to make sure you don't have trim or sub trim on the tail channel.

Sent from my Pixel XL using Tapatalk

Thank you....got it dialed now

04-21-2019, 03:09 PM	#1 (permalink)
mikem65d Registered Users Join Date: Dec 2017	yaws to the right Would mechanical linkage adjustment remove a slight yaw to the right in flight? __________________ AMA 70865

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-21-2019, 06:45 PM	#2 (permalink)
Ivan Registered Users My HF Map location Join Date: Jun 2004	If you have the AR7200, make sure your gain channel is set to heading hold mode and not rate mode. If it is in rate mode and you want that, then yes, mechanical trim will help. If it is in heading hold mode, then check to make sure you don't have trim or sub trim on the tail channel. Sent from my Pixel XL using Tapatalk

Register Now

Log-in