Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Blade Helicopters (eFlite) > 360CFX


360CFX Blade 360 CFX Helicopters Information and Help


Reply
 
LinkBack Thread Tools Display Modes
Old 08-03-2019, 03:52 PM   #1 (permalink)
Registered Users
 

Join Date: Jul 2019
Location: Florida
Default Blade 360 cfx blade pitch

I'm new to the forum. Apologies if this has been answered before.

I had a minor crash with my 360 cfx a couple of weeks ago. I wound up replacing 2 of the 3 cyclic servos and all the servo and head pushrods. Just flew it for the first time and it seems like there is not enough pitch in the rotor. it hovers at about 3/4 stick instead of the original 55-60% stick position. What is the correct pitch range for this machine? I can not seem to find that info anywhere. Thanks
PHstar is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 08-03-2019, 05:20 PM   #2 (permalink)
Registered Users
 
Posts: 1,543
 

Join Date: Feb 2019
Location: USA::Ohio
Default

im not sure but in idle up 2 it should be same travel in bth directions
__________________
Spektrum DX8G2, AccuRC Simulator
Blade Scout CX, MSR S, Nano S2, 230s V2, 360CFX, NanoQX
Oxy 4 MAX, 2 (215)
SAB Goblin 500 Sport
fiddle is online now        Reply With Quote Quick reply to this message
Old 08-03-2019, 06:56 PM   #3 (permalink)
Registered Users
 
Posts: 9,354
 

Join Date: Feb 2013
Location: Fargo ND (Home of the NDSU Thundering Herd)
Default

If you installed new servos and pushrods you will need to do nearly the entire AR7200BX setup from the beginning - step by step with no steps skipped

Setup Step G will show how to center the servos and the steps after that will be keen to setting the 6-degree and 12-degree collective ranges

If you don't have the AR7200BX manual...Google will lead you to a PDF
__________________
nCPX(3)*mCPX(25)*130X(10)*130X-L(6)*180CFX(3)*300X/CFX(3)
450X(7)*470LP*GauiX3*nanoQX*180QX*DX9*HF180060*AMA 988253
JonJet is offline        Reply With Quote Quick reply to this message
Old 08-08-2019, 09:03 AM   #4 (permalink)
Registered Users
 
Posts: 691
 

Join Date: Jan 2012
Default

You only need to check step G, J and K dont listen to JonJet.

Sent from my SM-G960U1 using Tapatalk
CrazyComi is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1