 |
START HERE |
|
| Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
|
|
|
Unregistered
|
||||||
| 130X Blade 130X Helicopters Information and Help |
|
|
 |
|
|
LinkBack | Thread Tools | Display Modes |
09-26-2019, 01:18 PM
|
#1 (permalink) |
|
Registered Users
|
Red Bull 3n1 on Standard 130X
Does anyone know if there is a way to get into the gain settings of the Red Bull 3n1 like there is on the 3n1 for the standard 130X. The Red Bull 3n1 is the only one available from Horizon. My 130X with the Red Bull flys fine except it needs the tail gain reduced. Thanks
__________________
Matt Outrage 550 T-REX 600E CF Blade 130X, mCPX BL2, 360CFX, Fusion 180, Nano CPX, OMP M2 Explore |
|
|
| Sponsored Links | |||
|
Advertisement |
|
||
|
09-27-2019, 06:44 AM
|
#2 (permalink) |
|
Registered Users
Join Date: Apr 2016
|
I beleive they are the same. Only difference is that the motor runs in the reverse compared to the 130x
|
|
|
|
09-27-2019, 11:00 AM
|
#3 (permalink) |
|
Registered Users
Thread Starter
|
I reversed the wires on the motor connector, but now would like to lower the gain. Powering on with full throttle is not working for me.
__________________
Matt Outrage 550 T-REX 600E CF Blade 130X, mCPX BL2, 360CFX, Fusion 180, Nano CPX, OMP M2 Explore |
|
|
|
|
09-27-2019, 11:02 AM
|
#4 (permalink) |
|
Registered Users
Join Date: Feb 2013
Location: Fargo ND (Home of the NDSU Thundering Herd)
|
What TX do You have?
The 3n1 might only be reading 96-99 Throttle and not going into programming mode Try calibrating your TX sticks - the RedBull board programs just like the original
__________________
nCPX(3)*mCPX(25)*130X(5)*130X-L(6)*180CFX(12)*300X(2) 450X(3)*470LP*GauiX3*nanoQX*180QX*DX9*HF180060*AMA 988253
|
|
|
|
|
09-27-2019, 03:39 PM
|
#5 (permalink) |
|
Registered Users
Thread Starter
|
JonJet, Thanks, I have a DX9 and bumped to throttle travel up to 110% and that worked.
__________________
Matt Outrage 550 T-REX 600E CF Blade 130X, mCPX BL2, 360CFX, Fusion 180, Nano CPX, OMP M2 Explore |
|
|
|
|
09-27-2019, 04:37 PM
|
#6 (permalink) |
|
Registered Users
Join Date: Feb 2013
Location: Fargo ND (Home of the NDSU Thundering Herd)
|
It's better to calibrate the sticks...
System Setup > Yes > System Settings > Next > Next > Next Follow the Calibration indicators and Save
__________________
nCPX(3)*mCPX(25)*130X(5)*130X-L(6)*180CFX(12)*300X(2) 450X(3)*470LP*GauiX3*nanoQX*180QX*DX9*HF180060*AMA 988253
|
|
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
