Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > EGODRIFT


EGODRIFT Support Forum


Like Tree15Likes
  • 1 Post By Thunder Fighter
  • 2 Post By Thunder Fighter
  • 2 Post By EGODRIFT
  • 4 Post By EGODRIFT
  • 4 Post By EGODRIFT
  • 1 Post By daboxe
  • 1 Post By Puttputt maru
Reply
 
LinkBack Thread Tools Display Modes
Old 04-02-2020, 09:24 PM   #1 (permalink)
Registered Users
 

Join Date: Jul 2015
Default Logo 800

Which motor/shaft would fit the new logo 800?
Thx
daboxe is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 04-03-2020, 07:41 AM   #2 (permalink)
Registered Users
 
Posts: 5,216
 

Join Date: Jul 2007
Location: Melb, Oz
Default

I just checked with one of the team pilots who has the new Logo 800. The 55mm shaft is the one you want.

//Dennis.
EGODRIFT likes this.
__________________
soXos Strike7 : soXos 600 : soXos 550 : soXos F3C 800
Protos 380 : soXos DB7 nightflyer : Jeti DS-16 & DS-12 : Mini Protos FBL Stretch : Logo 600
I am www.soxosaustralia.com.au | VTX blades | 1st-RC Products | EGODRIFT motors
Thunder Fighter is offline        Reply With Quote Quick reply to this message
Old 04-03-2020, 07:46 AM   #3 (permalink)
Registered Users
 
Posts: 5,216
 

Join Date: Jul 2007
Location: Melb, Oz
Default

I missed you also asked about which motor. I know he is running the new Tengu 4530HT 380kv on 14s, which was developed specifically for this model, but of course will work in others as well.

I have the same motor ready to go into my soXos 800.

//Dennis
jrman83 and EGODRIFT like this.
__________________
soXos Strike7 : soXos 600 : soXos 550 : soXos F3C 800
Protos 380 : soXos DB7 nightflyer : Jeti DS-16 & DS-12 : Mini Protos FBL Stretch : Logo 600
I am www.soxosaustralia.com.au | VTX blades | 1st-RC Products | EGODRIFT motors
Thunder Fighter is offline        Reply With Quote Quick reply to this message
Old 04-03-2020, 08:01 AM   #4 (permalink)
Registered Users
 
Posts: 64
 

Join Date: May 2019
Location: Austria
Default

Hi daboxe,

we just yesterday happened to shoot some photos for the announcement of our new Tengu 4530HT/380kV for 14S (with 6x55mm shaft) which - as Dennis mentioned correctly - was developed for & tested on the Logo 800, but will of course fit other models just as much.

The new models (there's also a 6x35mm shaft option for SAB Goblin/XLPower) should hopefully make in to our website over the next couple hours and is already available for ordering by our resellers.

I'll make sure to post the link to the product page here once it's up

Hope this helps, thanks a lot for your patience and

best regards

Vincent
Thunder Fighter and jrman83 like this.
__________________
Vincent Offenbeck
EGODRIFT Brushless Motors | Official Account
Please feel free to contact us for questions & support,
or visit www.egodrift.com
EGODRIFT is offline        Reply With Quote Quick reply to this message
Old 04-03-2020, 08:07 AM   #5 (permalink)
Registered Users
 
Posts: 64
 

Join Date: May 2019
Location: Austria
Default Tengu 4530HT / 380kV (14S) for Logo 800 (and others)

Seems I clicked before the attachments loaded
Attached Thumbnails
Click image for larger version

Name:	egodrift-logo800_b1.jpg
Views:	43
Size:	86.0 KB
ID:	850923   Click image for larger version

Name:	egodrift-logo800_b2.jpg
Views:	39
Size:	57.1 KB
ID:	850925   Click image for larger version

Name:	egodrift-logo800_b5.jpg
Views:	46
Size:	58.9 KB
ID:	850927   Click image for larger version

Name:	4530HT-380kV-motor.jpg
Views:	32
Size:	62.0 KB
ID:	850929  
__________________
Vincent Offenbeck
EGODRIFT Brushless Motors | Official Account
Please feel free to contact us for questions & support,
or visit www.egodrift.com
EGODRIFT is offline        Reply With Quote Quick reply to this message
Old 04-03-2020, 11:59 AM   #6 (permalink)
Registered Users
 
Posts: 64
 

Join Date: May 2019
Location: Austria
Default Tengu 4530HT / 380kV is up on our website

I'd say four hours still falls in my "next couple (of)" category, so here we go - fresh on our website:

Tengu 4530HT/380kV (14S) for Logo 800, 800Xxtreme (and alike)
https://www.egodrift.com/tengu-4530-...ter-motor.html

-> available in 6x55mm (for Mikado Logo) and 6x35mm (for SAB Goblin, XLPower, ...) shaft sizes starting.... now

Some of our dealers might not have listed the product numbers in their stores yet, but they will most certainly be able to source the motor for you already #supportyourdealers

Vincent
__________________
Vincent Offenbeck
EGODRIFT Brushless Motors | Official Account
Please feel free to contact us for questions & support,
or visit www.egodrift.com

Last edited by EGODRIFT; 04-03-2020 at 12:00 PM.. Reason: typo
EGODRIFT is offline        Reply With Quote Quick reply to this message
Old 04-03-2020, 07:50 PM   #7 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Jul 2015
Default

Great! Thanks.
EGODRIFT likes this.
daboxe is offline        Reply With Quote Quick reply to this message
Old 07-29-2020, 12:46 PM   #8 (permalink)
Registered Users
 
Posts: 5,995
 

Join Date: May 2009
Default

Wiil the Egodrift Tengu 4530HS / 510kV Motor (55mm shaft) work just as well for the Logo 800? Cannot seem to find the 370Kv anywhere.
EGODRIFT likes this.
__________________
TDSF, TDR-II, Triabolo, 2 X TDR, Logo 700,Protos evoluzione, T-Rex 700Dominator, Drake & Raw, SpiritRS, Jeti DC-24,HW,Kosmik,Jive Pro
EF MXS 3W110, Ultimate Aeroworks 20-300, DA 170, PowerBox Mercury, Q80-8M in a 91" EF Extra and MXS 104+ few jets
Puttputt maru is offline        Reply With Quote Quick reply to this message
Old 07-29-2020, 01:03 PM   #9 (permalink)
Registered Users
 
Posts: 12,882
 

Join Date: Feb 2012
Location: Northern, VA
Default

I guess it depends on where you are located.

https://www.egodrift.com/tengu-4530-...ter-motor.html

https://www.helidirect.com/collectio...tor-35mm-shaft
__________________
-Ben
Oxy 2/3/4/5; XL 550/700; Protos 380/700 EVO; RAW; Jeti DS12 Carbon

EGODRIFT Team, Lynx/Oxy Field Rep
jrman83 is online now        Reply With Quote Quick reply to this message
Old 07-29-2020, 09:24 PM   #10 (permalink)
Registered Users
 
Posts: 5,995
 

Join Date: May 2009
Default

Quote:
Originally Posted by jrman83 View Post
Thanks for the link, I had looked at helidirect but for som et reason it did not turn up.
__________________
TDSF, TDR-II, Triabolo, 2 X TDR, Logo 700,Protos evoluzione, T-Rex 700Dominator, Drake & Raw, SpiritRS, Jeti DC-24,HW,Kosmik,Jive Pro
EF MXS 3W110, Ultimate Aeroworks 20-300, DA 170, PowerBox Mercury, Q80-8M in a 91" EF Extra and MXS 104+ few jets
Puttputt maru is offline        Reply With Quote Quick reply to this message
Old 08-06-2020, 07:02 AM   #11 (permalink)
Registered Users
 
Posts: 64
 

Join Date: May 2019
Location: Austria
Default

Quote:
Originally Posted by Puttputt maru View Post
Wiil the Egodrift Tengu 4530HS / 510kV Motor (55mm shaft) work just as well for the Logo 800? Cannot seem to find the 370Kv anywhere.
We've run the Tengu 4530HS/510kV in heavy 800s and while the new 4530HT for 14S might give you an overall better experience, the 4530HS will work just fine on 12S.

kindest regards

Vincent
__________________
Vincent Offenbeck
EGODRIFT Brushless Motors | Official Account
Please feel free to contact us for questions & support,
or visit www.egodrift.com
EGODRIFT is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1