Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Spektrum FBL System > Spektrum FC6250HX



Reply
 
LinkBack Thread Tools Display Modes
Old 12-17-2020, 03:16 PM   #1 (permalink)
Registered Users
 

Join Date: Jun 2009
Default tail servo centering

i must be missing something, where do you select 760 or 1520 as the servo center? i am used to the beast x where there is a selection.
rcflier1 is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 12-17-2020, 05:32 PM   #2 (permalink)
HF Scale Support
 
Posts: 3,566
 

Join Date: Jan 2010
Default

Go to Forward Programming, Setup, Tail Rotor, Output Setup and set the Frame Rate. The manual has it covered from there.

Don
Keyrigger is online now        Reply With Quote Quick reply to this message
Old 12-17-2020, 06:04 PM   #3 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Jun 2009
Default

yep, that did it, thanks. now if i could only get rid of that annoying tail drift while sitting on the bench.
rcflier1 is offline        Reply With Quote Quick reply to this message
Old 12-18-2020, 03:30 PM   #4 (permalink)
HF Scale Support
 
Posts: 3,566
 

Join Date: Jan 2010
Default

Connect your 6250 to the computer with the 3065 data cable and use the Spektrum Programmer to connect and update your FC. However, you will need to re-level the 6250 after updating the the latest version.

Don
Keyrigger is online now        Reply With Quote Quick reply to this message
Old 12-19-2020, 06:27 AM   #5 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Jun 2009
Default

yep, did that already, had read about it. no change. still slow drift
rcflier1 is offline        Reply With Quote Quick reply to this message
Old 12-19-2020, 08:52 AM   #6 (permalink)
Registered Users
 
Posts: 54
 

Join Date: Jul 2020
Location: California
Default

My 3065 used to do that on my Fusion 360 with FC6250HX, but only on the bench. It never had any effect while flying. After I changed to the, in my opinion more reliable, KST ds215mg servos (also for tail) And calibrated I never had the issue anymore.


Sent from my iPhone using Tapatalk
Fusion is online now        Reply With Quote Quick reply to this message
Old 12-21-2020, 08:49 AM   #7 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Jun 2009
Default

update, i finally got a chance to try the calibration. tail drift on the bench gone. thanks.
rcflier1 is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1