Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Mikado V-BAR Control


Mikado V-BAR Control Mikado V-Stabi/V-BAR Control Flybarless System Software and Hardware Support


Reply
 
LinkBack Thread Tools Display Modes
Old 01-02-2021, 04:03 PM   #1 (permalink)
Registered Users
 

Join Date: Jun 2017
Default Swapped VCT now scorpion telemetry not working

I swapped my Vcontrol touch with a buddies vcontrol touch. I had everything perfectly setup and it was easy and painless, but no that I've swapped transmitter my scorpion telemetry info is not showing up on any of heli's. All of these helis have scorpion tribunus esc's and are in working order with telemetry cable and flown ever weekend prior to transmitter swapp.

I have the scorpion app downloaded and active on my vct, it shows up on my screen but shows no info when the model is plugged in. I'm using current firmware. What have I done wrong?

I have bound these heli's and even test flown a couple and everthying works minus the scorpion telemetry.
Neckbone1 is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 01-18-2021, 01:37 AM   #2 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Jun 2017
Default

I figured it out.
Neckbone1 is offline        Reply With Quote Quick reply to this message
Old 01-18-2021, 09:20 AM   #3 (permalink)
Registered Users
 
Posts: 1,141
 

Join Date: Sep 2006
Default

Curious of what the issue/fix was? I’m having an unrelated issue where my VCT appears to see the Scorpion Tribunus esc and reads the telemetry, battery may and headspeed. However I cannot get the Vbar gov to work properly. It hits a certain low headspeed and just stays there, no matter what I type in for requested headspeed. Example I type in 1300, 1600, 1900 and I get 1276 for all three. Updated all software and tried everything I can think of. I can switch over to the Scorp gov in the VCT and get my requested headspeeds that way ie 50%, 60%, 80% and it seems to work fine, I just prefer the feel of the Vbar gov. Anyway, not trying to hijack your thread as I could just start one but I’m curious if different things you may have tried to fix your issue.
jakeg1999 is offline        Reply With Quote Quick reply to this message
Old 01-18-2021, 10:25 AM   #4 (permalink)
Registered Users
 

Join Date: Dec 2014
Location: always windy on the east coast
Default

sounds like you bank switch isnt set up correctly or an app isnt there.
__________________
a bunch of helis... now all vcontrol and neo..finally :lol
tonys-heli is online now        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1