Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Kontronik Drives


Kontronik Drives Jazz and Jive ESC's and other Kontronik equipment support


Reply
 
LinkBack Thread Tools Display Modes
Old 03-22-2021, 04:21 PM   #1 (permalink)
Registered Users
 

Join Date: Apr 2004
Default Kool kosmik 200 with vbar control touch?

Hi guys,
Does anybody could help me? I have a kool kosmik 200 with vbar neo, i have updated both, but when i plugged on the kool kosmik doesn’t work, it is not beeping, no sounds, but i have power for the servos, servos are working normally.
I do have the telemtry TELLME MIKADO, and telemetry is ok as well.
luckyhs is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 03-22-2021, 11:34 PM   #2 (permalink)
Registered Users
 
Posts: 11,857
 
My HF Map location
Join Date: Sep 2007
Default

You need to do stick programming, MODE 1 to reset ESC and teach endpoints. Then you need to program a governor mode, normally mode 4. Take note that the Kontronik ESC's cannot use FBL governor so you need to set the Neo to external governor.

Stick programming with the VBCt is done via Collective Control, keep the dialogue open and it will survive a power cycle of the Neo.

https://www.kontronik.com/en/downloads.html

See at about 4:12 in this video
https://uroehr.de/vtube/cat/vbar-con...ideo/02-en-neo
__________________
Henseleit TDR, TDR2, TDF, TDS, TDSF
Kontronik, Scorpion ESC, iChargers, VBar,
VControl
Old hand at Planks
Peter
Vinger is offline        Reply With Quote Quick reply to this message
Old 03-23-2021, 09:06 PM   #3 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2004
Default

Now it is working, except for the banks, when i change through bank 1-3 the rom stays the same as bank 1 on all other banks, don’t know it is not changing the rpm.
luckyhs is offline        Reply With Quote Quick reply to this message
Old 03-23-2021, 11:35 PM   #4 (permalink)
Registered Users
 
Posts: 11,857
 
My HF Map location
Join Date: Sep 2007
Default

Make sure the master cable is plugged into ESC port of the Neo. If mode programming was successful then it should respond to different inputs from Neo.

Make sure Neo is set to external governor and that you have set different percentage for each bank.
__________________
Henseleit TDR, TDR2, TDF, TDS, TDSF
Kontronik, Scorpion ESC, iChargers, VBar,
VControl
Old hand at Planks
Peter
Vinger is offline        Reply With Quote Quick reply to this message
Old 03-25-2021, 09:25 AM   #5 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2004
Default

Sorry my mistake on setting the limits on the esc, i have leaved on default that it is on 40%, when i make the limits the 100% was 40%, now everything is great.
Thanks a lot guys.
luckyhs is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1