Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Mikado V-BAR


Mikado V-BAR Mikado V-Stabi/V-BAR Flybarless System Software and Hardware Support


Reply
 
LinkBack Thread Tools Display Modes
Old 05-18-2021, 08:20 AM   #1 (permalink)
Registered Users
 
Posts: 598
 

Join Date: May 2006
Default VBAR silverline Banks-internal GOV RPM changes

when switching BANKS only, the throttle status graph on the software shows that it spools up the throttle on the status graph each time you switch banks, goes to zero then up to selected rpm??

i am not switching banks with idle up switch-so i cant understand why the rpm starts up each time the bank switch is used..

thank you for any help on this
__________________
I Fly Mikado, Align-repair and Build all brands
marke is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 05-18-2021, 10:14 PM   #2 (permalink)
Registered Users
 
Posts: 11,819
 
My HF Map location
Join Date: Sep 2007
Default

Which radio system?
__________________
Henseleit TDR, TDR2, TDF, TDS, TDSF
Kontronik, Scorpion ESC, iChargers, VBar,
VControl
Old hand at Planks
Peter
Vinger is offline        Reply With Quote Quick reply to this message
Old 05-19-2021, 06:48 AM   #3 (permalink)
Registered Users
 
Posts: 598
Thread Starter Thread Starter
 

Join Date: May 2006
Default

Spectrum DX20-sorry should have mentioned that-i checked again and made sure each bank was not linked to idle up and it wasent . i also set reset on each bank when in the governor page to make sure the controller was the same for each bank. still no luck it operates like the governor wants to start from zero each time the bank switch is switched.. sounding like i am going to hang up using banks on Spektrum..
thank you for any help..
__________________
I Fly Mikado, Align-repair and Build all brands
marke is offline        Reply With Quote Quick reply to this message
Old 05-19-2021, 09:36 PM   #4 (permalink)
Registered Users
 
Posts: 11,819
 
My HF Map location
Join Date: Sep 2007
Default

One thing to remember is that your radio is not in charge of the throttle if you have selected the VBar governor. The percentages in the banks will determine the rpm output of the motor. Also the VBar will need rpm input from the ESC for VBar governor to work.

https://www.vstabi.info/en/node/641

https://www.vstabi.info/en/governor
__________________
Henseleit TDR, TDR2, TDF, TDS, TDSF
Kontronik, Scorpion ESC, iChargers, VBar,
VControl
Old hand at Planks
Peter
Vinger is offline        Reply With Quote Quick reply to this message
Old 05-20-2021, 12:53 AM   #5 (permalink)
Registered Users
 
Posts: 1,449
 

Join Date: Oct 2011
Location: ~Vienna, Austria
Default

is this for a test on bench with really running motor or just a test with vbar only? if yes, this could be the reason...
__________________
minicopters & Logos, YGE, Egodrift, Spirit 2/RS/GT/GTR, Jeti DS-12/Spirit Ed.
Rabid121 is online now        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1