Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > BeastX FBL System


BeastX FBL System BeastX FBL Flybarless System Software and Hardware Support


Reply
 
LinkBack Thread Tools Display Modes
Old 06-05-2021, 04:05 PM   #1 (permalink)
Registered Users
 

Join Date: Oct 2020
Location: Richmond, VA
Default Resolved: Pitch range reduced after upgrade to 5.1.3???

Resolution: I eventually realized that Step K allows you to extend the pitch ranges with the buttons there. The instructions in Studio x were not clear on that. Transitioning from transmitter programing to PC (Studio X) programming has been a steeper learning curve that I anticipated. Thanks!



Question:

After a recent firmware upgrade, I have a significant decrease in my pitch controls from + or - 12.5 deg to + or - 4.5 to 6 deg. I have the AR2710BX.



I made three changes at the same time which may have introduced too many variables. The 3 changes were:


1. Firmware upgrade from 4.1.5 (basic) to 5.1.3 (basic).
2. Switched setting the FBL from the transmitter to computer (StudioX)
3. Changed from preset "Control Style" (step B) from "extreme" to custom (375 deg/sec).


Since doing this my cyclic control is crazy great and is 12 to 13 deg. However, now my pitch ranges decreased to about 3.5 to 6 deg. I extended the transmitter endpoints for the pitch and it is now about 4.5 on one side 6 deg on the other.



In the old manual, setting up pitch range was done on step K "Collective pitch range & endpoints" where I would set it to 12.5 deg. But in the new manual, there is no place to set that. Step K has you check the throws until you get an "OK" sign from the StudioX software. Well it doesn't seem okay.



Is this normal? I assume I messed something up or their is a glitch in BeastX upgrade. When I fly it, I can also tell the loss of pitch authority. It is not just on the ground.



Thank you in advance for any thoughts or recommendations!


Charlie
__________________
Gaui X3, X5, Protos 700

Last edited by heychas; 06-05-2021 at 06:06 PM..
heychas is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1