Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > SAB Goblin 630/700/770


SAB Goblin 630/700/770 SAB Heli Division 630/700/770 - Goblin Helicopters Factory Support


Reply
 
LinkBack Thread Tools Display Modes
Old 06-20-2021, 05:52 PM   #1 (permalink)
Registered Users
 

Join Date: Apr 2004
Default Goblin 700c cyclic throw

Any of guys who has a 700c using a vbc/neo, what kind cyclic throw numbers are you getting?

I swapped from a silverline/dx9 and everything was perfect, even cyclic throw was at 8degree. But this neo is giving 11.6 instead of 8dgrs and .20/0degrs.

Any advice?
reefguy is online now        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 06-20-2021, 11:33 PM   #2 (permalink)
Registered Users
 
Posts: 10,055
 

Join Date: Mar 2011
Location: Charlotte, NC USA
Default

If I understand correctly, you had your Goblin 700 competition set up with an older VBar Silverline and a Spektrum DX9 transmitter, and you were happy with your VBar setup numbers. Now, you replaced the VBar Silverline with a Neo and the Spektrum DX9 with a VBC radio. You left the Goblin 700 competition mechanically the same (same servo arms, same blade grip arms, etc.), but your Neo setup numbers are not in the happy range. Does this sound correct? If so, can you verify you followed a brand new and complete setup after you installed the Neo?
__________________
Tron 7 (14S), Protos 700X Evo (14S), Kraken (14S)/Kraken 580 (7S)/Buddy 380 KSE (6S), Logo 550SX V2 (7S); YGE "T" ESCs; VBC Touch & Neo Vlinks, AGM Deep Cycle Batteries
Sims on Mac: Heli-X, neXt, AccuRC, RF9, Phoenix, AeroFly RC7 Ultimate
jhamel is online now        Reply With Quote Quick reply to this message
Old 06-21-2021, 12:57 AM   #3 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2004
Default

Yes, exactly nothing changed, between the two fbl units. Of course the neo was setup as a new heli setup. I thought maybe the parameters/algorithm on the vbc /neo vs dx9/neo different. I changed the link lengths many different sizes just to see if I get could it to fall within the 8degree mark and still the same without throwing something else out if range..
reefguy is online now        Reply With Quote Quick reply to this message
Old 06-21-2021, 11:24 PM   #4 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2004
Default

Any guys of you use the PC or vbc to program your neo?

Last edited by reefguy; 06-21-2021 at 11:35 PM.. Reason: Unresolved
reefguy is online now        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1