Register Now

SAMUELPINONFLORES · 09-13-2013, 10:44 PM

Really nice and good idea-desig.

pixeltim · 09-26-2013, 10:24 PM

Loving it so far!

Big Island Guy · 10-05-2013, 12:24 PM

Frame from video captured over the Kohala Mountains, last month.

Andreas_S · 10-09-2013, 09:01 AM

PitchPump 3D

http://vimeo.com/64004636

and

Hexacopter Rubina

http://vimeo.com/75150949

clouseau · 10-10-2013, 09:48 PM

Very Nice! I see you have the 3D props on your R0sewhite Rachel, are you reversing your ESC's output to be able to utilize the 3D Props?

If so, could you please point a fellow R0sewhite Rachel owner to the correct code to be able to accomplish reversing with the ESC's.

Andreas_S · 10-11-2013, 01:04 AM

Yes this is a special version of the SimonK 3D firmware. You can have a look at this:

https://github.com/c---/MultiWii3D/t...tgy_2012-09-30

I can't give you the firmware we are using because there are different escs and you cant
use one firmware for all of them. So it depends what you are using BS NFET and so on.

Hope this helps.

bj660raptor · 10-15-2013, 06:39 PM

nice does it have to be a smooth transition to inverted or can you rainbow or tic toc that thing?

Andreas_S · 10-16-2013, 01:19 AM

That depends on the Motor, ESC and Props you are using. You can do rainbows with simonk but tic tocs like a helicopter are not possible. It takes to long till the reverse kicks in.

There are some new escs "Ultraesc" that handles this much better than simonk but they are alos a lot slower than a helicopter.

Just think of it like a 8° Pitch helicopter with low headspeed. You can fly everything but you have to be very carefull on the sticks.

jmisuraca · 10-20-2013, 09:23 PM

Today I replaced my first screw on my blackout frame. I ran into a tree at about 5-9 mph and 10+ feet up, Pushing my FPV abilities. This is not the first time I trimmed some trees with it.

I have about 60 flights on it and this is my 4th crash.
Damage = nicked propeller, and one plastic screw

Screw in place, and ready for a before work flight in the morning

clouseau · 10-21-2013, 09:08 PM

Quote:

Originally Posted by Andreas_S

Yes this is a special version of the SimonK 3D firmware. You can have a look at this:

https://github.com/c---/MultiWii3D/t...tgy_2012-09-30

I can't give you the firmware we are using because there are different escs and you cant
use one firmware for all of them. So it depends what you are using BS NFET and so on.

Hope this helps.

Thank you very much for the Information!

SAMUELPINONFLORES · 10-23-2013, 07:01 PM

Quote:

Originally Posted by jmisuraca

Today I replaced my first screw on my blackout frame. I ran into a tree at about 5-9 mph and 10+ feet up, Pushing my FPV abilities. This is not the first time I trimmed some trees with it.

I have about 60 flights on it and this is my 4th crash.
Damage = nicked propeller, and one plastic screw

Screw in place, and ready for a before work flight in the morning

Wooow that blackout Mini H frame is so small, you can fly it virtually anywhere.

I liked it a lot.

jmisuraca · 10-24-2013, 10:07 AM

Quote:

Originally Posted by SAMUELPINONFLORES

Wooow that blackout Mini H frame is so small, you can fly it virtually anywhere.

I liked it a lot.

Small and lite = no to little damage in crashes. I have hit branches and landed upside down many times with no damage.

Although it's small it flies like a bigger rig.

Full size FPV gear. Cc3d. 2s 1500mah. AUW 360g. Flying for 5:00 and putting back 65-70%. I can't complain.

mrob73 · 10-25-2013, 10:58 AM

Looks like the perfect travel rig. I will have to check it out.

Trex 250, Trex 450 , 300x, hover things flip quad, Nex Neo FPV quad, DJI 550 hex and soon to be Gaui X5.

Airworks · 10-25-2013, 05:06 PM

yeh , whats the price average on a little bug like that???

clouseau · 10-25-2013, 06:05 PM

Quote:

Originally Posted by Airworks

yeh , whats the price average on a little bug like that???

http://www.minihquad.com/frames/blac...i-h-quad-frame

You have to realize it's an all carbon fiber frame, so yes the cost of this durable little machine is going to be more than anything made of just plastic and fiberglass.

It's well worth having a quad that can take a hit like this can, just put on a new prop or two and keep on flying....

jmisuraca · 10-25-2013, 11:11 PM

Quote:

Originally Posted by Airworks

yeh , whats the price average on a little bug like that???

You could build one for less then Blackout's full package.

Get the Mini H Frame from Blackout $150
add in some blades, plastic crash parts... Your at $200

Motors, ESC's, and a MultiWii SE v2.5 from RCMart for $100
~ ZMR 1804 (2400KV) $9x4 = $36
~ RCX 12A ESC (SimonK) $8x4 = $32

2x Battery (NanoTech 1300mah 3s 35c) and connector and or receiver from Hobbyking $50+
Pilot Camera and vTX from http://www.surveilzone.com/ $100

By not getting the best name branded gear you can put one of these in the air full FPV geared up for 400-450. Granted... It may take 4-6 week to get everything delivered, but you are saving money.

But you will have something designed for FPV, that flies great, that's as tough as nails. for less then a DJI F450 w Naza M lite with no fpv gear.

My total cost was a little higher as I got the CC3D fc, T-Motors, and ImmersionRC vTX, but I would fly the above rig I just spec-ed.

jmisuraca · 10-25-2013, 11:15 PM

Quote:

Originally Posted by clouseau

http://www.minihquad.com/frames/blac...i-h-quad-frame

You have to realize it's an all carbon fiber frame, so yes the cost of this durable little machine is going to be more than anything made of just plastic and fiberglass.

It's well worth having a quad that can take a hit like this can, just put on a new prop or two and keep on flying....

+1 to the thing can crash and fly away, I have done it more then once.

Things that break in a crash on this frame... blades and plastic screws. That's all I have had to replace so far <knocks on wood> but you know the old saying... Mileage will vary. i fly over grass and not concrete or blacktop.

Jeff Troiano · 11-14-2013, 08:25 AM

Deleted. Mistaken post

papatango72 · 11-21-2013, 10:03 PM

XXXXX

helinor69 · 11-22-2013, 08:24 AM

My first is a DJI F330 quad

Specs:
DJI F330 frame
DJI 920KV motors
Hobbyking Blue series 20A ESC`s
DJI 8x45 props soon to bee Graupner E-Prop 8x5
KK2.0 FC board running 1.6++ fw
Spektrum DX6i Tx with AR6210 Rx
4S 1800 mAh nano-tech battery

My second is a HJ450 quad

Spec:
HJ 450 frame
DJI 920KV motors
DJI 30A OPTO ESC`s
DJI 10x38 props
DJI landing gear
Turnigy 3A BEC
KK2.0 FC board running V1.6 sw
Spektrum DX6i Tx with AR6210 Rx and satellite
4S 3300 mAh nano-tech battery

Extras:
Modified a lower plate to go on top to get better attachment for the battery when I have my GoPro on.

09-13-2013, 10:44 PM	#201 (permalink)
SAMUELPINONFLORES Registered Users Join Date: Sep 2011	Really nice and good idea-desig. __________________ FUSION 50 /CGY750 PROTOS 500 /SKOOKUM SK540BELT CP V2,CYPHER 3D BIG NAZA QUADCOPTER FLIP FPV

09-26-2013, 10:24 PM	#202 (permalink)
pixeltim Registered Users Join Date: Dec 2011	My new 350QX! Loving it so far! __________________ My aerial photos are at pixeltim.com Phantom 2 Vision and assorted other egg-beaters.

10-05-2013, 12:24 PM	#203 (permalink)
Big Island Guy HF MR Support Join Date: Nov 2012	Frame from video captured over the Kohala Mountains, last month. __________________ 3 years cancer free! Woot!! ~ Cancer can kiss my grits! Ainokea! If you never crash, you're not having enough fun! Pilot, Team Lavaquad

10-15-2013, 06:39 PM	#207 (permalink)
bj660raptor Registered Users Join Date: Apr 2010	nice does it have to be a smooth transition to inverted or can you rainbow or tic toc that thing? __________________ 600 DFC HV Pilot Brandon J.

10-25-2013, 10:58 AM	#213 (permalink)
mrob73 Registered Users Join Date: Oct 2012	Post your Multi-rotor pics here! Looks like the perfect travel rig. I will have to check it out. Trex 250, Trex 450 , 300x, hover things flip quad, Nex Neo FPV quad, DJI 550 hex and soon to be Gaui X5. __________________ GAUI USA Field Rep./ Team Empire / Optipower USA Field Rep./Skookum Robotics Field Rep. / HALO Blades Field Rep./ OMG USA field rep.

10-10-2013, 09:48 PM	#205 (permalink)
clouseau HF MR Support Join Date: Mar 2012	Very Nice! I see you have the 3D props on your R0sewhite Rachel, are you reversing your ESC's output to be able to utilize the 3D Props? If so, could you please point a fellow R0sewhite Rachel owner to the correct code to be able to accomplish reversing with the ESC's.

10-11-2013, 01:04 AM	#206 (permalink)
Andreas_S Registered Users Join Date: Nov 2005	Yes this is a special version of the SimonK 3D firmware. You can have a look at this: https://github.com/c---/MultiWii3D/t...tgy_2012-09-30 I can't give you the firmware we are using because there are different escs and you cant use one firmware for all of them. So it depends what you are using BS NFET and so on. Hope this helps.

10-16-2013, 01:19 AM	#208 (permalink)
Andreas_S Registered Users Join Date: Nov 2005	That depends on the Motor, ESC and Props you are using. You can do rainbows with simonk but tic tocs like a helicopter are not possible. It takes to long till the reverse kicks in. There are some new escs "Ultraesc" that handles this much better than simonk but they are alos a lot slower than a helicopter. Just think of it like a 8° Pitch helicopter with low headspeed. You can fly everything but you have to be very carefull on the sticks.

10-25-2013, 05:06 PM	#214 (permalink)
Airworks Registered Users Join Date: Apr 2009	yeh , whats the price average on a little bug like that??? __________________ Warp, 6HV LED,6HV, Alien 450 MR, 250 mini Quad racer(4s monster) FPV rules the roost!

11-14-2013, 08:25 AM	#218 (permalink)
Jeff Troiano Registered Users Join Date: Jun 2012	Post your Multi-rotor pics here! Deleted. Mistaken post

11-21-2013, 10:03 PM	#219 (permalink)
papatango72 Registered Users Join Date: Jul 2008	XXXXX

Register Now

Log-in