Register Now

MotorG525 · 05-03-2015, 10:30 AM

While browsing for parts I found this, seems like they make custom lowers

https://www.rcpartsunlimited.com/ind...ory&path=86_87

trickybit · 05-03-2015, 11:47 AM

Seems they're free, too!

prototype3a · 05-03-2015, 12:56 PM

$26 per side isn't bad at all for real CF. I wonder if he can do a custom version with a wider diagonal piece for mounting ESCs.

MotorG525 · 05-03-2015, 02:01 PM

I emailed them earlier, there willing to cut any frames including the top halves for the e700. He just needs to borrow a set for tracing, anybody have an extra set

f2000ez · 05-03-2015, 05:45 PM

Why no phone number or pricing on the website???

MotorG525 · 05-03-2015, 06:10 PM

You have to pick a material first before you can get a price. For example the 2mm g10 is $7. You can also email the owner through the contact us section of the site

prototype3a · 06-01-2015, 03:15 PM

Got my custom Jeti Mezon e700 parts. I had them done in G-10 since I wasn't 100% certain I got everything exactly right but I had a bunch of other custom parts cut from 2mm CF and they look very nice and it is in fact 100% real CF. None of this cheap sandwiched FG/CF stuff.

Temporarily bolted on since I don't have the correct flat head screws on hand...

Drew up a little plate to hold the Mezon's soft power switch in the empty servo hole.

Rotorious · 10-29-2015, 04:25 PM

I ordered the 2.5mm G10 lower frames after my last crash. I'm happy to report they got perfect and are plenty stiff.

prototype3a · 10-29-2015, 05:43 PM

geez 2.5mm. I would hope so. Mine are only 2mm g-10

Rotorious · 10-29-2015, 06:20 PM

Lol, yup. I wasn't sure what to expect, so I erred on the side of caution. The only G10 I have had in my hand before seemed pretty flimsy. Granted, it was only 1.5mm thick.

It was only a couple bucks more than 2mm, and the extra weight is not enough to notice in flight, so why not.

prototype3a · 10-29-2015, 08:26 PM

All I can say is that all g10 isn't created equal. I've had some really flimsy stuff in hand but Michal uses both the good g10 and the great solid/real carbon fiber.

Rotorious · 10-29-2015, 08:29 PM

Yep, it's definitely good material

Stevewashere · 12-12-2015, 05:52 PM

Great find thanks, Ive just ordered 2.5mm carbon lowers for my spare e700 air frame

fastpcuser · 02-29-2016, 02:42 PM

I'm the owner of Rcpartsunlimited.com, the site was down for little as I was too busy during the holidays. But if you need any parts cut let me know. I do custom orders as well not only what listed. If you dont have what you need all I need is broken frame and I can make drawing and do custom modification to your order. You can contact me through Helifreak for faster response.

I took phone number off of my website because I used my cell number and I was getting too many scam calls.

ug6gkg · 04-23-2016, 01:24 AM

Hi, I made payment few days ago and waiting for your response.

I received it, thanks

Sent from my iPad using Tapatalk

05-03-2015, 10:30 AM	#1 (permalink)
MotorG525 Registered Users Join Date: Jan 2014	Lower frames While browsing for parts I found this, seems like they make custom lowers https://www.rcpartsunlimited.com/ind...ory&path=86_87

05-03-2015, 11:47 AM	#2 (permalink)
trickybit Registered Users My HF Map location Join Date: Sep 2007	Seems they're free, too! __________________ PRÔTOS 500 Plastic, Logo 550SX/600SX, PRÔTOS Max2 up and flying! Team MSH USA, Team Cyclone, Team Xnova

05-03-2015, 12:56 PM	#3 (permalink)
prototype3a Registered Users My HF Map location Join Date: Jun 2006 Location: Chrisitansburg VA USA	$26 per side isn't bad at all for real CF. I wonder if he can do a custom version with a wider diagonal piece for mounting ESCs. __________________ Jeti DS14us -- TT e700 -- 6s Logo600se UL -- Logo600-3d -- Logo500 UL -- Charge Case

06-01-2015, 03:15 PM	#7 (permalink)
prototype3a Registered Users My HF Map location Join Date: Jun 2006 Location: Chrisitansburg VA USA	Got my custom Jeti Mezon e700 parts. I had them done in G-10 since I wasn't 100% certain I got everything exactly right but I had a bunch of other custom parts cut from 2mm CF and they look very nice and it is in fact 100% real CF. None of this cheap sandwiched FG/CF stuff. Temporarily bolted on since I don't have the correct flat head screws on hand... Drew up a little plate to hold the Mezon's soft power switch in the empty servo hole. __________________ Jeti DS14us -- TT e700 -- 6s Logo600se UL -- Logo600-3d -- Logo500 UL -- Charge Case Last edited by prototype3a; 06-03-2015 at 10:33 AM..

10-29-2015, 04:25 PM	#8 (permalink)
Rotorious Registered Users Join Date: Apr 2014	I ordered the 2.5mm G10 lower frames after my last crash. I'm happy to report they got perfect and are plenty stiff. __________________ Citizen 529

05-03-2015, 02:01 PM	#4 (permalink)
MotorG525 Registered Users Thread Starter Join Date: Jan 2014	I emailed them earlier, there willing to cut any frames including the top halves for the e700. He just needs to borrow a set for tracing, anybody have an extra set

05-03-2015, 05:45 PM	#5 (permalink)
f2000ez Registered Users Join Date: May 2011	Why no phone number or pricing on the website???

05-03-2015, 06:10 PM	#6 (permalink)
MotorG525 Registered Users Thread Starter Join Date: Jan 2014	You have to pick a material first before you can get a price. For example the 2mm g10 is $7. You can also email the owner through the contact us section of the site

10-29-2015, 05:43 PM	#9 (permalink)
prototype3a Registered Users My HF Map location Join Date: Jun 2006 Location: Chrisitansburg VA USA	geez 2.5mm. I would hope so. Mine are only 2mm g-10 __________________ Jeti DS14us -- TT e700 -- 6s Logo600se UL -- Logo600-3d -- Logo500 UL -- Charge Case

10-29-2015, 06:20 PM	#10 (permalink)
Rotorious Registered Users Join Date: Apr 2014	Lol, yup. I wasn't sure what to expect, so I erred on the side of caution. The only G10 I have had in my hand before seemed pretty flimsy. Granted, it was only 1.5mm thick. It was only a couple bucks more than 2mm, and the extra weight is not enough to notice in flight, so why not. __________________ Citizen 529

10-29-2015, 08:26 PM	#11 (permalink)
prototype3a Registered Users My HF Map location Join Date: Jun 2006 Location: Chrisitansburg VA USA	All I can say is that all g10 isn't created equal. I've had some really flimsy stuff in hand but Michal uses both the good g10 and the great solid/real carbon fiber. __________________ Jeti DS14us -- TT e700 -- 6s Logo600se UL -- Logo600-3d -- Logo500 UL -- Charge Case

10-29-2015, 08:29 PM	#12 (permalink)
Rotorious Registered Users Join Date: Apr 2014	Yep, it's definitely good material __________________ Citizen 529

12-12-2015, 05:52 PM	#13 (permalink)
Stevewashere Registered Users My HF Map location Join Date: Nov 2009	Great find thanks, Ive just ordered 2.5mm carbon lowers for my spare e700 air frame __________________ Compass 550 ULT, Eznov Neuron \| Thunder Tiger e700 Mini Vbar \| Thunder Tiger G4 e820 SPARTAN (Committed suicide)\| DX8 #286

02-29-2016, 02:42 PM	#14 (permalink)
fastpcuser Registered Users Join Date: Dec 2013	I'm the owner of Rcpartsunlimited.com, the site was down for little as I was too busy during the holidays. But if you need any parts cut let me know. I do custom orders as well not only what listed. If you dont have what you need all I need is broken frame and I can make drawing and do custom modification to your order. You can contact me through Helifreak for faster response. I took phone number off of my website because I used my cell number and I was getting too many scam calls.

04-23-2016, 01:24 AM	#15 (permalink)
ug6gkg Registered Users Join Date: Jan 2010	Lower frames Hi, I made payment few days ago and waiting for your response. I received it, thanks Sent from my iPad using Tapatalk Last edited by ug6gkg; 05-02-2016 at 06:05 PM..

Register Now

Log-in